[mailto:soaring@bigpond.net.au]
[http://www.lmsoft.com/PowerByLMSOFTEN]
[./ts1.html]
[./ts2.html]
[./ts3.html]
[./ts4.html]
[./ts5.html]
[./ts6.html]
[./vb_commodore_faults.html]
[./vc_commodore_faults.html]
[./vh_commodore_faults.html]
[./vk_commodore_faults.html]
[./vl_commodore_faults.html]
[./vn_commodore_faults.html]
[./vp_commodore_faults.html]
[./vr_commodore_faults.html]
[./vs_commodore_faults.html]
[./vt_commodore_faults.html]
[./vx_commodore_faults.html]
[./vy_commodore_faults.html]
[./vz_commodore_faults.html]
[./ve_commodore_faults.html]
[./v6_efi_conversions.html]
[./v6_ecotec_efi_conversions.html]
[./v6_sc_ecotec_efi_conversions.html]
[./v6_alloytec_efi_conversions.html]
[./v8_5ltr_efi_conversions.html]
[./gen_iii_5.7ltr_efi_conversions.html]
[./gen_iv_6.0ltr_efi_conversions.html]
[./wiring_harnesses.html]
[./modified_memcals.html]
[./v6_conversions.html]
[./v8_conversions.html]
[./vr_manual_conversions.html]
[./speedo_adapters.html]
[./engines.html]
[./engine_building.html]
[./transmissions.html]
[./exhausts.html]
[./brakes.html]
[./differentials.html]
[./suspension.html]
[./fuel_systems.html]
[./electric_windows.html]
[./electronic_dashes.html]
[./interiors.html]
[./vs_calais_ute.html]
[./vr_calais_ute.html]
[./vp_calais.html]
[./vn_exec.html]
[./vl_calais_mad.html]
[./vl_calais_pro.html]
[./vl_calais_v8.html]
[./vk_wagon.html]
[./vk_sedan.html]
[./vk_ss.html]
[./hq_monaro.html]
[./hq_monaro_efi.html]
[./hq_gts.html]
[./hx_sedan.html]
[./hx_statesman.html]
[./hz_ute.html]
[./wb_ute.html]
[./58_chevrolet.html]
[./54_chevrolet.html]
[./toyota_corolla.html]
[./25_chevrolet.html]
[./38_willys.html]
[./28_ford.html]
[./valiant_charger.html]
[./dodge_phoenix.html]
[./1960_dodge_phoenix.html]
[./1961_dodge_phoenix.html]
[./1962_dodge_phoenix.html]
[./1963_dodge_phoenix.html]
[./1964_dodge_phoenix.html]
[./1965_dodge_phoenix.html]
[./1966_dodge_phoenix.html]
[./1967_dodge_phoenix.html]
[./1968_dodge_phoenix.html]
[./1969_dodge_phoenix.html]
[./1970_dodge_phoenix.html]
[./1971_dodge_phoenix.html]
[./1972_dodge_phoenix.html]
[Web Creator] [LMSOFT]
VN Commodore Interior and Body Issues
Phoenix Mechanical
Soaring

Steering wheel - Steering wheel padding is molded over a round metal bar, and after a lot of use the padding can rotate freely around the bar. This is defectable, as it compromises grip. A replacement steering wheel is required, whether it be new or second hand. Keep in mind that steering wheels are designed specifically to collapse with the steering column during an accident. Many sports steering wheels and/or boss kits are illegal, unless they comply with ADR's (Australian Design Rules).

Seat belts - Seatbelt fray is common in any aging car, and is illegal and unsafe. New seat belts are available for auto parts stores. Seat belt stalk buttons can fail and not properly lock when the belt buckle is inserted. In either situation, the seat belt unit should be changed to ensure occupant safety. The seat belts should also be changed if the vehicle has ever been in an accident, because the seat belt material stretches to absorb inertia.

Seat Base - VN seats often break the right front inner mounting tabs that bolt the mechanism to the floor. Seat runners are usually available second hand.

Door trim dust seals - VN's use an inner door window dust seal, to prevent dust and road noise entering the cabin. The rubber seals are initially glued to a trim strip which is colour matched to the vehicles trim. The rubber seals often become unstuck and fall inside the door cavity, which increases cabin noise and dust entry. Re-gluing is sometimes successful, or new ones are available through Holdens in a charcoal colour.

Inner dust seal - Part number M40949

Door seals - VN Commodores use a rubber door seal around each door cavity which is glued to a colour coded pinch strip. The rubber often comes unstuck from the pinch strip and can tear. Re-gluing is sometimes successful, or new items are available from Holdens in a limited range of colours.

Check straps - A check strap is a spring loaded arm inside the door that pivots between the door and door pillar. Ideally this strap holds the door open, but the spring of the check strap can snap which prevents the check strap from functioning properly. The check strap can also clunk during door opening, which can be caused by a dry roller (part of the check strap) or by a worn pin against the door pillar.

Check strap - Part number 92042531

Check strap pin - Part number 90195523

Window regulators - Standard front window regulators are a pressed steel scissor design, but do wear out. Wear is evident if the window tilts forward while being wound up. The regulators can be adjusted by a slide located behind the door trim, but adjustment is limited. Tight or worn bailey channel (window) rubbers can inhibit the windows movement and place excessive stress on the regulator.

RHF window regulator manual - Part number 92039810

LHF window regulator manual - Part number 92039809

RHF window regulator electric - Part number 90272068

RHF window regulator manual - Part number 90272067

Window regulator slide - Part number 7997785

Window rubbers - VN door window rubbers are renowned for sliding from their original position. The front doors suffer most from this, with the front rubbers sliding up and the rear rubbers sliding down. This leads to leaking windows, loose windows, tight window operation, or very loose window operation. The rubbers can be moved and correctly positioned, but if left for to long the rubbers can be damaged and distorted. New rubbers are available from Holden dealers.

Bonnet hinges - When the double pivot bonnet hinges used on VN's wear out, the rear corners of the bonnet can touch against the windscreen when the bonnet is slightly opened. This contact can be enough to chip the edge of the windscreen or send a crack through the windscreen. New bonnet hinges are available through Holdens.

Bonnet hinge RH - Part number 92045574

Bonnet hinge LH - Part number 92045575

Bumper side brackets - The front and rear bumper end brackets are clipped to the body with T rivets. The bumper slides over these brackets, but the brackets are plastic and can break away from the bumper or from the body T rivets. New brackets are available from Holden dealers.

RHF bumper bracket - Part number 92028553

LHF bumper bracket - Part number 92028552

Door handles - The exterior door handles are plastic, and break when fatigued. It is advisable to replace broken exterior handles with VR-S handles, as they are metal. The only difference will be the gloss painted finish on the metal handle instead of the dull textured finish on the plastic handle.

Outer door handle (Matt finish Diecast) - Part number 92046390

Outer door handle (plastic) - Part number 92034445

Bonnet cable - The bonnet cable has an outer cover and an inner cable. The outer cover is held to the radiator support panel by a small clamp, which is responsible for location and adjustment. The outer cover can tear through the clamp which will stop the bonnet from opening. The inner wire cable can stretch which also stops the bonnet from opening. New bonnet cables are available through Holdens.

Bonnet cable - Part number 92030228PX

Bonnet rod pivot - Part number 90355810

Bonnet rod retainer - Part number 94225097

Bonnet rod guide (bonnet skin inner) - Part number 90247253